TWO-PART ACRYLIC ADHESIVES
Two-Part Acrylic Adhesives are capable of reducing or replacing the need for threaded fasteners, welds or rivets, resulting in a lower cost assembly.Specially formulated to provide tough, long-lasting bonds to most surfaces, including steel, galvanized steel, aluminum, sheet metal, stainless steel, plastics and composites.
LOCTITE® AA H8610
LOCTITE® AA H8610 is an off-white, 2-part, thixotropic, room temperature curing methacrylate acrylic adhesive designed for structural bonding of most galvanized metals. It also has excellent shear strength on steel and aluminum and withstands long-term heat and humidity exposure in severe environments. This adhesive contains 0.005 in (0.13 mm) glass beads to insure adequate bondline control.
LOCTITE® AA H8000
LOCTITE® AA H8000 is a green, 2-part, non-sag, room temperature curing methacrylate acrylic adhesive system. It has a fast fixture time and excellent bond strength on multiple substrates including metals, plastics and composites. It also provides high elongation and excellent cold temperature impact strength. It forms resilient bonds and maintains its strength over a wide range of temperatures.
LOCTITE® AA H8003
LOCTITE® AA H8003 is a two component, room temperature curing methacrylate adhesive system. It is designed to have a fast fixture time and excellent bond strength on multiple substrates while offering superior peel and impact resistance.
LOCTITE® AA H8600
LOCTITE® AA H8600 is a blue, 2-part, viscous, methacrylate-based, acrylic bonding liquid designed for structural galvanized steel bonding. It was designed for use at ambient temperature while maintaining strength at high temperatures as well (e.g. +248 °F {+120 °C}). It can be applied horizontally or vertically as required. It is used where long term durability bonding galvanized steel is required.