Adhere Distributors

June 24, 2011







Finally, itís here! A painterís tape that actually works and gives you clean crisp lines after removing it!

FrogTape is specially designed to work with latex paint and is the only tape treated with PaintBlock Technology. PaintBlock is a superabsorbent polymer technology that can absorb and retain large amounts of a liquid relative to its own mass. Applied to the edges of FrogTape, it reacts with the water in latex paint to form a micro-barrier along the edges of the tape. This makes FrogTape more resistant to paint bleeding than regular masking or painterís tape. All you need to do is apply the tape, paint, remove the tape and, voila, beautiful, clean, edges with no paint bleeding!

It doesnít matter if youíre a pro or a weekend painter Ė Frog tape makes every painting job look great!

Visit our website to learn more about Carworx automotive products, or visit Adhere Distributors in person.


anaerobic adhesives

When a tight, secure fit or seal is what you need, look no further than 3M Scotch Weld Anaerobic Adhesives to get the job done right.

3Mís anaerobic adhesives have been specially designed for use in the absence of oxygen as threadlockers, pipe sealants, retaining compounds and gasket. This line of adhesives cures quickly into a tough plastic to ensure a tight seal, hold or fill.

Threadlockers are particularly useful for screws and bolts in applications subject to vibrational and impact stress such as gear housing and motor mounts. Pipe Sealants produce an instant seal and can replace the use of traditional PTFE (Teflon) tapes and ďOĒ rings.

Retaining Compound is ideal for non-threaded components and can increase load bearing of cylindrical joints, reduce assembly stresses, and tighten tolerances in worn bearing, gears and shafts. Filling metal-to-metal voids and sealing dissimilar metals with 3Mís Gasket Makers is a breeze and eliminates the need for pre-cut or compression gaskets.

With 27 anaerobic adhesives to choose from, 3M and Adhere Distributors are sure to have the right product for your application.

instant adhesives

With 3M Scotch-Weld Instant Adhesives, a little bit goes a long way.

These solvent-free cyanoacrylate adhesives can generate up to 2 tones of holding pressure with just a single drop and do so with a super-fast curing time.

But, being fast isnít everything: these instant adhesive liquids and gels bond a multitude of materials - metals, rubber, EPDM, HSE and LSE plastics, woods and more. Theyíre also designed to work in a variety of different industrial conditions including, elevated temperatures, on oily or soiled surfaces, and when a gap filling adhesive is required, just to name a few. In fact, 3M has developed over 40 different instant adhesives in this product line along with the convenient ďGo ToĒ Quick Selection Guide and the Full Line Selection Guide so you can match each product with temperature ranges, time to handle, and substrate to find the right adhesive for your task.

3Mís line of Scotch-Weld Instant Adhesives provide strength, versatility, seconds-fast bonding to give you instant success with a seemingly endless number of applications.